[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [T3] HP Figures 65-73 (was carb conversion)

To: type3@vwtype3.org
Subject: Re: [T3] HP Figures 65-73 (was carb conversion)
From: Jim Adney <jadney@vwtype3.org>
Date: Thu, 28 Aug 2003 09:15:12 -0500
In-reply-to: <IE84435YNHZWOIRO98PKNIQOEKHCB2W.3f4d6a5b@lucretia>
List-help: <mailto:type3-request@vwtype3.org?subject=help>
List-post: <mailto:type3@vwtype3.org>
List-subscribe: <mailto:type3-request@vwtype3.org?subject=subscribe>
List-unsubscribe: <mailto:type3-request@vwtype3.org?subject=unsubscribe>
Old-return-path: <jadney@vwtype3.org>
Priority: normal
References: <1062036383.672.399.camel@charliebrown>
Reply-to: type3@vwtype3.org
Resent-date: Thu, 28 Aug 2003 07:12:48 -0700 (PDT)
Resent-from: type3@vwtype3.org
Resent-message-id: <Puhbj.A.CK.f3gT_@cedant5>
Resent-sender: type3-request@vwtype3.org

On 27 Aug 2003 at 19:35, Hal Sullivan wrote:

> Now, the issues with T4 valve *seats* has been pretty well
> figured out and cured, if you can get a shop to do them *right* instead
> of "how the factory says to do them". 

Please explain the 2 and what the differences are. Does any of this apply to 
our heads?

-- 
Jim Adney
jadney@vwtype3.org
Madison, WI 53711-3054
USA

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org

Follow-Ups:
- RE: [T3] HP Figures 65-73 (was carb conversion)
  - From: "Carver" <carver@ncwebsurfer.com>

References:
- Re: [T3] HP Figures 65-73 (was carb conversion)
  - From: Russ wolfe <russella@prairieinet.net>
- Re: [T3] HP Figures 65-73 (was carb conversion)
  - From: Hal Sullivan <tristessa@pon.net>

Prev by Date: Re: [T3] HP Figures 65-73 (was carb conversion)
Next by Date: RE: check out this Fastback
Previous by thread: Re: [T3] HP Figures 65-73 (was carb conversion)
Next by thread: RE: [T3] HP Figures 65-73 (was carb conversion)
Index(es):
- Date
- Thread