[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
>>Give us the dimensions of this washer.>> Well, half of it's smashed into bits. The other half I could measure tonight. It appears about the same width as a washer used under the screws to mount the engine tin, but the thickness is greater. >>So you're using 2 M8 x 1.25 bolts into the fan hub and pushing down into the center of the crank? If so, this should pull right out. No matter what, DON'T pull from the outer edge of the fan.>> Yes, something must be wrong though. I pulled hard enough to bend a piece of flatbar. Can I heat the area with a torch? Joe ------------------------------------------------------------------- List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org