[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On 3 Apr 2003 at 10:48, Tad Heckaman wrote: > >It may not have been all the way into gear, or you might have had it in > a high > >gear where it took more turns than you expected. > > I tried the 1st and second gear, and also reverse. I was kinda hard to > get the stick out of 1st gear though, took me a few seconds of wiggling > the stick before it came out. Would the clutch stop working after > sitting there for 8 years? How is it hooked up, cable or hydralic? The clutch is cable operated, so it should be fine. There is some small chance that there is something wrong with the clutch disk or even in the transmission. Still, it's most likely that you just don't have it all the way into gear. > Is that what that little panel is for? I couldn't figure out what that > was for! Yes, that's it. > Well, good thing the only things in there was the radio and turn signal > relay, I don't have FI in there (yet). I should swap those cables before > I put my radios in. Right, turn it around before you forget about it. -- Jim Adney jadney@vwtype3.org Madison, WI 53711-3054 USA ------------------------------------------------------------------- List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org