[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On 17 Oct 2002, at 11:10, HBakr@aol.com wrote: > yes, now I have it facing down but I wonder if the 1 min. test run with it > facing the wrong way might have caused this problem by not compressing downwards > and relieving the high cold oil pressure. I just don't know what could have > caused this since I didn't touch either the oil breather or the fan bolt. I only > removed the oil cooler and replaced the seals! Anyways, today I will be checking > the fan bolt. Actually, I would have expected the plunger to work either way, or does the spring actually fit up inside the hole in the bottom of the plunger? I don't think it does, so the hole should really make no difference. Did the oil spray quit when you corrected the plunger? A loose fan bolt is unlikely, but I'm grasping at straws here. - Jim Adney jadney@vwtype3.org Madison, WI 53711-3054 USA ------------------------------------------------ To unsubscribe, E-mail to: <type3-off@vwtype3.org> For more help, see http://vwtype3.org/list/