[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On 16 Nov 2002, at 21:57, Hugh Lawrence wrote: > I am trying to attach new hoses to my fuel injectors. I was wondering > whether I can use the little pinholes on the plastic 2 prong connector piece to > help release the bell caps or not. I want to switch out the 1.5 inch pieces of > hose attached to the injectors and reattach new hose with 14mm clamps. Yes, the hoses certainly can, and should, be replaced. Not sure what "pinholes" you mean, but the way to remove the OEM hoses is to carefully cut off the steel crimp ferrule on the hose end. You must do this very carefully to avoid cutting into the hose nipple underneath, or else you may not be able to get the new hose to seal. - Jim Adney jadney@vwtype3.org Madison, WI 53711-3054 USA ------------------------------------------------ To unsubscribe, E-mail to: <type3-off@vwtype3.org> For more help, see http://vwtype3.org/list/