Re: [T3] Emissions failure

[Russ Wolfe <russella@prairieinet.net>]

On Thu, 2002-02-28 at 23:16, Everett Barnes wrote:
> > On 28 Feb 2002, at 18:37, Everett Barnes wrote:

> 
> Thanks for all the feedback from everyone so far.
> 
> One thing I realize now is the car might not have been fully warmed up.  I
> went there after work, a distance of only 2 miles.  I then sat in line for
> 15-20 minutes with the car turned off.  Outside temp was 70F.
> 
> Also, would the 009 affect anything?  I plan to locate a correct stock
> vacuum dizzy, 311 905 205 G.
> 
Check the resistance of the dist rotor too. It shouldn't be much over
5000 ohms.
I have a spare 311 905 205 E dist. It is supposed to be for a '65 single
carb engine.

Or--- you could sell me the car for $100 and I would title it here in
Iowa. :=)

-- 
Russ Wolfe
'66 FB MT (It drove)
'71 FB AT
'65 113 MT 
russw@classicvw.org
http://www.classicvw.org


-------------------------------------------------------------------
Too much? Digest! mailto:type3-d-request@vwtype3.org Subj=subscribe