[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
<x-charset iso-8859-1>Is that what the issue is? My connector just seem to pop off every now and then. I'll have to tighten up that connector..... ----- Original Message ----- From: "Jim Adney" <jadney@vwtype3.org> To: <type3@vwtype3.org> Sent: Thursday, February 28, 2002 8:38 PM Subject: Re: [T3] 150 mile update and a few questions The problem is that later injectors seem to actually use contact material which is slightly thinner than the original. The female contacts in the connector will be loose on these. The fix is to disassemble the connector and squeeze the female pins VERY SLIGHTLY so that they grip the injector pins snugly. You should probably still do this, on all 4 injector connectors, just to make sure that you don't have this problem again. ------------------------------------------------------------------- Unsubscribe? mailto:type3-request@vwtype3.org, Subject: unsubscribe </x-charset>