Re: [T3] tie rod end

[John Jaranson <jaransonT3@comcast.net>]

Barry wrote:
>I recently discovered (through buying the wrong one,
>and then through the list archives) that the left
>inner tie rod end is unique to the type 3 and hard to
>find.....  
>.....it is the second half of 1968, with the thicker pins. 
>Does anyone know where I can get one of these?  Please
>help!  

Barry, 

I was able to order the correct late model, angled, larger diameter pin,
left inner tie rod end from my FLAPS (Autozone, to be specific). 
Unfortunately, I needed the early, small diameter version which is NLA.  I
went with a straight one and have had no problems to date.  They were
replaced about 2 months ago.

Check the archives.  The part numbers are there.


Later,
John Jaranson
'71 FI AT Fasty (Jane)
'66 Square (Sophy)
About Half a Late Square (Organ Donor)
http://mywebpages.comcast.net/jaransonT3/jaransonT3/  (This is my new
website address)

-------------------------------------------------------------------
Search old messages on the Web!  Visit http://www.vwtype3.org/list/