[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
Barry wrote: >I recently discovered (through buying the wrong one, >and then through the list archives) that the left >inner tie rod end is unique to the type 3 and hard to >find..... >.....it is the second half of 1968, with the thicker pins. >Does anyone know where I can get one of these? Please >help! Barry, I was able to order the correct late model, angled, larger diameter pin, left inner tie rod end from my FLAPS (Autozone, to be specific). Unfortunately, I needed the early, small diameter version which is NLA. I went with a straight one and have had no problems to date. They were replaced about 2 months ago. Check the archives. The part numbers are there. Later, John Jaranson '71 FI AT Fasty (Jane) '66 Square (Sophy) About Half a Late Square (Organ Donor) http://mywebpages.comcast.net/jaransonT3/jaransonT3/ (This is my new website address) ------------------------------------------------------------------- Search old messages on the Web! Visit http://www.vwtype3.org/list/