[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
Jim, On this one, there is no fluid coming out. I get about 1/2" in the top of the tube and then it just moves back/forth on both sides. I don't even get much of a flow pulling the bleeder screw out. What else should I check? Thanks, Andy -----Original Message----- From: type3@vwtype3.org [mailto:type3@vwtype3.org]On Behalf Of Jim Adney > Question 2: Probably a no-brainer, but before noting the problem above, I > was trying to bleed the brakes. Rears work fine, but the front only moves > the same air back and forth in the tube from the bleeder nut to my handy > jar-o-fluid. Would this indicate a blown MC? If you put your tube down into the fluid and pump quickly there will always be some fluid return, but it will be minor. I suspect what you are seeing is normal and not a problem. It is NOT a sign of a bad MC. ------------------------------------------------ To unsubscribe, E-mail to: <type3-off@vwtype3.org> For more help, see http://vwtype3.org/list/