[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]

Re: [T3] Emissions failure


<x-charset Windows-1252>EverettB=> need some advice on what I can do
=> to reduce the emissions

I'm no expert at this, but I'd try raising your idle to 1000 or 1100. Mine
seems a lot happier and smoother there, firing better. Also check for
fouling on 3, that could cause uneven fuel draw.

(Scientists: am I remembering right that we'll get higher CO readings when
the heads are not fully warmed up?)

=> no spring under the breather cap ... There
=> is a little wire bundle thing in there.

The point of both the spring and the mesh is to keep the restrictor in place
so oil doesn't blow right out. One or the other is fine.

Steven Ayres, Prescott AZ
'66 Grosse Karmann

-------------------------------------------------------------------
Too much? Digest! mailto:type3-d-request@vwtype3.org Subj=subscribe

</x-charset>

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]