[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
<x-charset iso-8859-1>Hello- Re: cams... I strongly recommend against reusing your old camshaft. It's very likely worn, especially if your lifters have gone concave! Go Webcam or go bust... they are far and way the best cam manufacturer out there. Engle is horrible... anything that needs to be jigged up for pre-breaking in and still fails is a bad product. Webcam is definately superior... I don't know of someone who's had a failure with one. Get their lifters to match. Re: cam gears, well, here reusing the stock one is a good idea. Drill out the dowels, remove the stock cam from it, and make it into a bolt-on gear for your new cam. That way, you still have the exact correct gear size for your engine as it came from the OEM. Take care, Shad Laws LN Engineering - Aircooled Precision Performance http://www.LNengineering.com ------------------------------------------------------------------- List info at http://www.vwtype3.org/list or mailto:help@vwtype3.org </x-charset>