[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On Fri, 2002-02-15 at 20:57, Matt Halter wrote: > Does anyone know the wiring for the backup lites that bolt to the bumper > . I have one that works , the other nothing. Driver side is spliced into > the passenger then runs to the trans . There is also a wire that comes > from the coil towards the driver side but doesn't look like its been > hooked up to anything in awhile. The passenger side is the that works > ,I've checked the bulbs they're both fine . Should > I splice the one from the coil into the driverside? It has to have > power? right, so why would the passeng- er side be working ? Any clues ? > The back up lights on a manual trans is as follows: #15 terminal on the coil to fuse holder. fuse holder to back up switch on trans. backu switch on trans to (T) connector at engine compartment. from T connector, to each backup light. -- Russ Wolfe '66 FB MT (It drove) '71 FB AT russw@classicvw.org http://www.classicvw.org ------------------------------------------------------------------- Search old messages on the Web! Visit http://www.vwtype3.org/list/