[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On 7 Feb 2002, at 14:42, Greg Merritt wrote: > Note that once adjusted, you can mark an exposed portion of the > flap rod to indicate the closed position. (Can this be done precisely > enough to gauge proper adjustment of a new thermostat?) Remove the air cleaner and pop out the plastic SP double wire holder that is installed just to the rear of it (rear is rear.) That leaves you a hole about 1 cm in dia which you can stick a bent wire thru to gauge the position of the flap. You can usually make the adjustment from below by turning the thermostat on the rod and retightening and checking.... - Jim Adney jadney@vwtype3.org Madison, WI 53711-3054 USA ------------------------------------------------------------------- Search old messages on the Web! Visit http://www.vwtype3.org/list/