[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
One outer notch is nearly 2 inches, and one inner notch is a little more than that. To do one inch you'll need to do a combination of inner and outer. This is a little risky not to loose track, make sure you mark both ends of the bar. I believe Haynes lists the number of notches that will allow you to do the math. Peter Parker '66 Square; Phillip Portland, OR >While I have the front end in pieces I was thinking of lowering the front end slightly to match the sagging back end. I want to go down about 1 inch or so. How hard is it to get everything lined up if I do decide to go ahead and lower it, and how many splines would achieve a 1 inch drop? ------------------------------------------------ To unsubscribe, E-mail to: <type3-off@vwtype3.org> For more help, see http://vwtype3.org/list/