[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
<x-charset windows-1252>I will second the recommendation for brushing on the POR-15. It self-levels nicely and leaves a nice smooth finish. It is not particularily heavy and could be sprayed. There are thinning instructions on the can for spraying if your equipment needs it thinner. I also was able to fill small pin holes with it by taping behind them. For larger holes (1/8" or so) I have successfully used fiberglass fabric and as a reinforcement for the POR-15 to fill these in. It did take a couple of applications to fill in all the pinholes in the fabric that result. Also can't be stressed enough.....wear old clothes, gloves, and eye protection. The stuff stays around for a long time if you get it on your skin. Doubt that it will come out of clothing. Later, John Jaranson '71 FI Auto Fasty (Jane) '66 Square (???) About Half a Late Square (Organ Donor) http://mywebpages.comcast.net/jaransonT3/jaransonT3/ (This is the new address for my website) ------------------------------------------------------------------- List info at http://www.vwtype3.org/list or mailto:help@vwtype3.org </x-charset>