Re: [T3] Clock talk

["Mark Fuhriman" <mfuhriman1@hotmail.com>]

<x-flowed>Those little pounts were originally stuck together with a low-temp solder.  
That's the fuse.  The easiest way to fix is to just solder those points back 
together with the solder that's already on the points.  Use a low-temp 
setting on your iron, and be quick and careful.  If you use any other kind 
of solder that you commonly find at the hardware store, you will no longer 
have the fuse protection.  I think I read somewhere that the melting point 
of that original solder is around 50C (?).

-Mark Fuhriman

_________________________________________________________________
Join the worldâs largest e-mail service with MSN Hotmail. 
http://www.hotmail.com

-------------------------------------------------------------------
Unsubscribe? mailto:type3-request@vwtype3.org, Subject: unsubscribe

</x-flowed>