[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On 5 Apr 2002, at 10:17, phil wrote: > When I get around to pulling the motor back out to fix > this, can I shim the return fitting with a washer or > two at the case? No, just buy an NPT tap and tap the female fitting a bit deeper so you can turn the fitting to the position you like. > How would I fix where the 2 NPTs attach to eachother > to make the turn to clear the fan housing? There's no > way that I can tell to adjust the angles - it's either > tight or not. Use street elbows, not regular elbows, and you can get 2 different kinds: regular ones and short ones (like the ones Berg sells with the kits.) If you use 2 of the short ones and one long one, all in just the right position, you will clear the fan housing completely. - Jim Adney jadney@vwtype3.org Madison, WI 53711-3054 USA ------------------------------------------------------------------- Too much? Digest! mailto:type3-d-request@vwtype3.org Subj=subscribe