[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
Isn't this a little optimistic, You want to put the oil pressure sensor where pressure is the higher and the temp sensor where temp is lower ? Shouldn't it be the other way around ? Struck me as wrong way around. Herman > This should be good. > > My dilema was choosing between the two mounting points. In the T-1 > location, it's in the main oil galley right after the pump and before the > cooler. The T-3 location is on the output side of the oil cooler. So I > wanted to mount the oil pressure in the T-1 location to get the output > pressure from the pump. Then mount the oil temp in the T-3 location after > the cooler so it reports the temp of oil going to the rest of the motor > (obviously after warm-up). > > Please correct me if I'm wrong on this! > > Joe > ------------------------------------------------------------------- List info at http://www.vwtype3.org/list or mailto:help@vwtype3.org