[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
I mounted mine to the pressure relief valve, if you have a Dual-relief case I would mount it to the longer one - so as not to obstruct movement. I would also install a rev counter, oil pressure and head temp gauge, in this order - you can never know to much of what's It does damage clearance somewhat, but since I raised my rear to stock height - it's fine by me. Herman > Where would I mount an oil temp sensor? I was going to Tee off the stock > location for the stock sender and oil temp. Is there a better place? > > Joe > ------------------------------------------------------------------- List info at http://www.vwtype3.org/list or mailto:help@vwtype3.org