[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On Wed, 17 Oct 2001 19:40:39 -0400 (EDT), Mark Healey wrote: >On Wed, 17 Oct 2001 19:41:51 -0600, Jim Adney wrote: > >>On 17 Oct 2001, at 16:19, Mark Healey wrote: >> >>> I got a scan of a spec sheet/drawing from Amp. >>> >>> http://www.healeyonline.com/~marksvw/c925558.jpg >> >>These are close, and they MIGHT even work, but they are not ours. >>I see 2 differences: The contact tips of these are rolled over to give >>a wider contact, while on ours the contact is only as wide as the >>sheet the contacts were punched from. > >Actually if you take it out and look at it they are rolled as well, at >least on the 71, and 72 harnesses I have. > >>And the tips on these are >>gold plated, while ours are not. > >>From what I've figured out so far the two rightmost columns are part >numbers. The part after the dash is is a subscript. "Werkstoff" is >what it is made of. "Oberfl„che" is what they are plated with. >"Drahtbereich", "Isolations í", "Band-Stand", "Band MQC" and >"Einzelausf" Have me stumped. > >So the table is: > >0,5...1,0 mm^2 1,8---2,8 Brass Unplated 925558-8 925558-6 >0,5...1,0 mm^2 1,8---2,8 Brass Zinc 925558-7 925558-5 >0,5...1,0 mm^2 1,8---2,8 Bronze Tips plated with 925558-4 925558-4 > .0008mm of gold >0,5...1,0 mm^2 1,8---2,8 Bronze Tips plated with 925558-3 925558-3 > .0004mm of gold >0,5...1,0 mm^2 1,8---2,8 Bronze Zinc 925558-6 925558-2 925558-2 >0,5...1,0 mm^2 1,8---2,8 Bronze Unplated 925558-5 925558-1 925558-1 > > ? ? Material Plating ? ? ? > Oops, I meant tin where it says Zinc. You'll also want to read this with a monospaced font. Mark Healey 71 FI auto square 71 FI manual square marksvw@healeyonline.com ------------------------------------------------------------------- List info at http://www.vwtype3.org/list or mailto:help@vwtype3.org