[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [T3] More FI pins info--need translation from german
On Wed, 17 Oct 2001 19:40:39 -0400 (EDT), Mark Healey wrote:
>On Wed, 17 Oct 2001 19:41:51 -0600, Jim Adney wrote:
>
>>On 17 Oct 2001, at 16:19, Mark Healey wrote:
>>
>>> I got a scan of a spec sheet/drawing from Amp.
>>>
>>> http://www.healeyonline.com/~marksvw/c925558.jpg
>>
>>These are close, and they MIGHT even work, but they are not ours.
>>I see 2 differences: The contact tips of these are rolled over to give
>>a wider contact, while on ours the contact is only as wide as the
>>sheet the contacts were punched from.
>
>Actually if you take it out and look at it they are rolled as well, at
>least on the 71, and 72 harnesses I have.
>
>>And the tips on these are
>>gold plated, while ours are not.
>
>>From what I've figured out so far the two rightmost columns are part
>numbers. The part after the dash is is a subscript. "Werkstoff" is
>what it is made of. "Oberflche" is what they are plated with.
>"Drahtbereich", "Isolations í", "Band-Stand", "Band MQC" and
>"Einzelausf" Have me stumped.
>
>So the table is:
>
>0,5...1,0 mm^2 1,8---2,8 Brass Unplated 925558-8 925558-6
>0,5...1,0 mm^2 1,8---2,8 Brass Zinc 925558-7 925558-5
>0,5...1,0 mm^2 1,8---2,8 Bronze Tips plated with 925558-4 925558-4
> .0008mm of gold
>0,5...1,0 mm^2 1,8---2,8 Bronze Tips plated with 925558-3 925558-3
> .0004mm of gold
>0,5...1,0 mm^2 1,8---2,8 Bronze Zinc 925558-6 925558-2 925558-2
>0,5...1,0 mm^2 1,8---2,8 Bronze Unplated 925558-5 925558-1 925558-1
>
> ? ? Material Plating ? ? ?
>
Oops, I meant tin where it says Zinc. You'll also want to read this with a monospaced
font.
Mark Healey
71 FI auto square
71 FI manual square
marksvw@healeyonline.com
-------------------------------------------------------------------
List info at http://www.vwtype3.org/list or mailto:help@vwtype3.org