[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
----- Original Message ----- From: phil cain <bearsvw2000@yahoo.com> > > Did you not know that all VW workers have > feelavision, (work without seeing). I use a spark plug > socket with a 3inch extison and start the plugs by > hand then tighten with ratchet, 1/2 turn past snug to > crush washer.To clean hole use a spark plug threader, > with grease on it, to clean the threads(grease to > catch the shavings)14mm, be sure to have it at the > right angle. Don't see why it took so long,You must > like being with your car. Let us know how it turns > out. Phil (P.S. I have most likley changed a few more > vw plugs than you and have got all the angles down > pat). > > A wheel bolt with a slot cut down the side of the thread can be used as a thread chaser. Just make sure you don't drop it inside the tinware! ------------------------------------------------------------------- Search old messages on the Web! Visit http://www.vwtype3.org/list/