[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
I think I know what the problem is: your head studs just aren't screwed in deep enough. Screw them deeper by locking two nuts (opposite direction -locks) and using a wrench , turn the studs in , You could also use a vice on the middle of the stud (where there isn't any thread) but it's harder. Hope this helps Herman > On 1 May 2001, at 23:43, Benjamin Hess wrote: > > > Just a couple of questions: first, I seem to be having trouble putting > > my heads back on. I have upgraded to 1835cc jugs and cylinders. When > > putting the rockerarms back on they hit the 2 center head studs. Has > > anyone else had this problem? I have a thin and thicker spacer under > > the rockers. Is this right, because there is nothing said about > > spacers in any book that I have? > > ------------------------------------------------------------------- > Search old messages on the Web! Visit http://www.vwtype3.org/list/ > >