[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
Where are the vacuum ports located on the carbs? Joe Plowick My Site: http://type3lvr.homestead.com ----- Original Message ----- From: "Tom Hansen" <DrSoWatt@worldnet.att.net> To: "Type 3 List" <type3@vwtype3.org> Sent: Friday, March 02, 2001 6:11 PM Subject: Re: [T3] 2 questions > > > > > The Dells I've seen actually have a vac port. Problem is the signal is > poor, > > as only one cylinder is served. Add to this a non stock cam and the vac > > signal is very poor. > > > > I did think of adding a reservoir/ accumulator type thing to smooth out > the > > vac pulses, but lost interest. > > Tee two vacuum ports together like 1&3, or 2&4. This doubles the vacuum > signal and is what I had to do on my 160hp T1 to get the fuel pressure > regulator to work correctly. Or tie them all together. > > Hope this helps > > Tom > http://home.att.net/~drsowatt/index.html > > > ------------------------------------------------------------------- > Pitch in! Send your pledge of support! mailto:support@vwtype3.org >