[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On 6 Jun 2001, at 1:53, DGaries808@aol.com wrote: > This is the last rebuild for it, as the case is more or less worn out > to 0.080 oversize. Cost was $260. IIRC, all the main bearing sets with OD greater than +.060 lack the steel inserts in the #2 mains. If so, these will not be as strong as the originals. RIMCO can confirm this. $260 sounds like a LOT for a badly beat 40 horse engine. - Jim Adney jadney@vwtype3.org Madison, WI 53711-3054 USA ------------------------------------------------------------------- Search old messages on the Web! Visit http://www.vwtype3.org/list/