[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
jesse and monica <jjmojo@blazenet.net> wrote: >On a side note, when i removed the rear fenders to check for rust >underneath of them i found that a lot of the sealer that vw used to seal >the joints to keep out dirt for the cooling air is coming loose. Had >anyone had this problem? I guess i will just use por15 por patch to >replace the loose pieces. Is there something that i am not thinking of >that would work well for this? I don't want to have to do it again. Jesse, Are you refering to the inner quarter fender seals? If so, there are replacements available. This is very critical in order to keep dirt and water from entering with the cooling air. ISP carries these pieces and they go up on Ebay regularly. As far as the floor pin holes, you can buy from your local Home Depot or the sort, a product that is called Kool Seal; http://www.koolseal.com/PRODUCTS/D40319.htm It is commonly used for auto undersides as well as the floor. This teamed up with their "Kool Flexx Reinforcing Grid" which is like a mesh, works like a champ. I have used it and it works great!! Hope this helps!!! Good luck...... -- Alex Magro '70 Fastback AT/FI '70 Square AT/FI '92 Jetta EcoDiesel __________________________________________________________________ Your favorite stores, helpful shopping tools and great gift ideas. Experience the convenience of buying online with Shop@Netscape! http://shopnow.netscape.com/ Get your own FREE, personal Netscape Mail account today at http://webmail.netscape.com/ ------------------------------------------------------------------- Unsubscribe? mailto:type3-request@vwtype3.org, Subject: unsubscribe