[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On 24 Jul 2001, at 20:21, Tom Falcone wrote: > Is it safe for me to assume that the rivet at the pivot point in the > vent window must be drilled out in order to completely remove the vent > window from it's frame? It seems it must be done in order to get the > seal into the frame. Am I correct on this? Please advise. You are correct, but having been thru this before, I'd recommend doing almost anything else because I was never able to replace this rivet properly. If I had this to do over again, I would cut the thin strip of rubber that goes around that hinge point and either trim it away completely, or use some "Black Max" superglue to glue it back together once the seal was installed. I have always regretted removing my rivets. - Jim Adney jadney@vwtype3.org Madison, WI 53711-3054 USA ------------------------------------------------------------------- List info at http://www.vwtype3.org/list or mailto:help@vwtype3.org