[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On 22 Jul 2001, at 10:36, Dave Campen wrote: > From: Jim Adney <jadney@vwtype3.org> > > Make sure that you have ALL the parts (except maybe the tiny > > little bits UNDER the spark plugs; I don't know if carb engines have > > these at all.) > > Which bits are these? The small pieces shaped (a bit) like a banana with a > slot each end? If so, they are on carb engines as well and seal around the > outboard side of the twin-port inlet manifold. Those are probably the ones. I wouldn't call the FI ones banana shaped, but yours may be. The ones I meant are fixed to the heads by 2 screws that point straight down. The important ones are the ones that go around the spark plug wires and are fixed by screws that point inboard. - ******************************* Jim Adney, jadney@vwtype3.org Madison, Wisconsin, USA ******************************* ------------------------------------------------------------------- Too much? Digest! mailto:type3-d-request@vwtype3.org Subj=subscribe