[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
Thorkhild writes: > I don't recommend using the 1/2" breaker bars unless you have a > lifetime warranty and are near the hardware store > Then Jim Adney writes: > The 1/2" drive really isn't quite up to this job if the part has been >there a long time. ;-) > Well, I have not managed to break my Craftsman 1/2 inch breaker bar doing this, but you are both correct that a 3/4 inch drive would be preferable. By the way, doesn't the plate with a hole for the nut and a second hole for a breaker bar have a 1/2 inch drive hole? Tim Dapper ------------------------------------------------------------------- Pitch in! Send your pledge of support! mailto:support@vwtype3.org