[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
Subject: Re: [T3] Push Rod Tubes > >and below is why I use sealer! Usually in my limited but practical > experience I find about 30 percent of the factory ones leak in time. I use > just a THIN layer of Red high temp RTV on the inside of the seal, slide it > on and then the same on the outside. > > However... you cant doodle around and have the RTV set before you get the > heads pulled down... so DONT do it on a humid day and have all your ducks in > a row when you apply it. at 73K NONE of mine leak on the square. > My engine was rebuilt last time in 1979. And they were done dry. They do not leak to this day. Russ Wolfe russw@classicvw.org http://www.classicvw.org/ ------------------------------------------------------------------- Too much? Digest! mailto:type3-d-request@vwtype3.org Subj=subscribe