[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
ive had a similar situation just before last winter cant tell you exactly what fixed it but heres what i did to fix the problem. start at the batt clean terminals ensure all are tight and super clean. voltage regulator remove one cable at a time clean replace ensure earth is good also generator remove one at a time clean all conections imaculate refit coil solder spade connector to wire ensure all is imaculate as ne all spades must be a good tight fit dizzy mech and vaccume adv working points set correctly or if pertronix etc fitted enough wire in dizzy to alow advance no problems plug leads checked for correct resistance plugs gapped correctly. 2hrs work and its not happened since heat expansion somewhere was giving a lose electrical its got to be worth a look !!! neil verdon 66 sqr on irs pan best among equals rise to the top. ------------------------------------------------------------------- List info at http://www.vwtype3.org/list or mailto:help@vwtype3.org