[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On 8 May 99, at 21:55, Keith Park wrote: > I dont have a special tool but if the piston head isn't buggered a needle > nose vice grip usually does it. put 1 blade on the flat part of the > cutout and the other on the outside diameter. you can also pressurize it > with air after removing the outer dust seal and blow the piston out (while > holding the other in place). and try again. ITS VERY IMPORTANT that you NOT cut the outer boot when you do this. Otherwise you will be getting a fresh rebuild within the year. Jim - ******************************* Jim Adney, jadney@vwtype3.org Madison, Wisconsin, USA ******************************* ------------------------------------------------------------------- List info at http://www.vwtype3.org/list or mailto:help@vwtype3.org