[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]

Re: [T3] Ignition switch removal


On 28 Jun 99, at 20:49, jk wrote:

>     I do not know what it is called but I will try to describe it. I have
> 1973 Squareback automatic tranny. One fine day, I tried to start my car on
> with compufire installed newly. I tried to give a crank all the sudden there
> is a smoke coming out from the steering wheel. I turned off quickly. And
> tried to switch the ignition on, it would not let me rotate more than five
> percent. I had an extra set of key to see if it is the key, no it is the
> ignition switch, I had to remove the steering wheel to check it out. I
> removed the ignition switch and it does rotates freely. My next guess that
> the electronic component which I do not know what does it is called between
> the ignition switch. I tried to remove it behind the steering wheel, I
> couldn't, It budge. What is the right way to remove it?  It is a small white
> plastic hexagon right behind the ignition switch.

The part that is your problem is the ignition switch. The part that 
worked ok is just the ignition lock cylinder. The switch has all the 
electrical switch connections in it and can be separately replaced. 
The Bentley manual has detailed instructions.

Jim
-
*******************************
Jim Adney, jadney@vwtype3.org
Madison, Wisconsin, USA
*******************************

bŽáV-----------------------------------------------------------
Unsubscribe? mailto:type3-request@vwtype3.org, Subject: unsubscribe


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]