[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On 15 Jun 99, at 9:33, James MacNaughton wrote: > The news? Runs somewhat better, but still has a bad stumble <miss>, and no > power. While adjusting the valves, it is apparent that the rocker on #4 > exhaust valve can't be backed off far enough to relieve tension on the valve > itself. Meaning; even if I back the screw adjuster *all the way out*, I > can't get .006" of play (really, I can't get any at all, the end of the > rocker is touching the valve). Are you sure that you are adjusted to #4 TDC (firing order is 1,4,3,2.) There should be no problem with just doing one or both heads. Hold a ruler across the 4 valve ends. Can you tell if this valve is too far in, or too far out? Jim - ******************************* Jim Adney, jadney@vwtype3.org Madison, Wisconsin, USA ******************************* -----------º[~÷------------------------------------------------ Too much? Digest! mailto:type3-d-request@vwtype3.org Subj=subscribe