[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On 18 Feb 99, at 21:44, Stan Schaefer wrote: > That explains why my Bentley diagram doesn't exactly match my harness. > There's some connections that are interchanged from what's on the > diagram. I've got them renumbered in the book, but was kind of shock > when I first got the car and was chasing FI gremlins. What I did at > the time was assume if it had continuity between the controller and > the end connector, the wire was good. Sometimes had to go looking for > the right slot in the connector. Hmmm, what year, etc is your car. I have never noticed that any of the Bentley schematics were wrong, just incomplete. For example, it does not show the complete system for the 72 or 73 with EGR (different for MT and AT) but that portion which is shown, is correct. The same goes for the rare 68-9 with cold start valve, which I have never seen installed, but I do have some parts for it from a friend who parted one out. Jim - ******************************* Jim Adney, jadney@vwtype3.org Madison, Wisconsin, USA ******************************* -------------------------------------I ---------------------- Unsubscribe? mailto:type3-request@vwtype3.org, Subject: unsubscribe