[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
The locktite that you want to use here is the green. That is, not blue
(non-permanent thread lock), not red (permanent thread lock), but green
(cylindrical lock). For example, you use this type to install press-fit
sealed bearings on machinery. That said, any of the above will work to some
degree.
Peter Parker
'66 Square; Phillip
Portland, OR
Jim Adney wrote:
> I would look at the line of Locktite products and see if they make
> one that would wick in and harden to do this job. I think this would
> have a very good chance of working if you got all the parts clean
> enough first.
-------------------------------------------------------------------
List info at http://www.vwtype3.org/list or mailto:help@vwtype3.org