[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
At 02:51 PM 7/25/97 -0700, David Yaghoubian wrote: > >Here's what I'm thinking I need to do... please add wisdom/product info >wherever possible! :) > >1. Buff off all the rust/paint down to the metal in and around all spots >where there is rust. >I am assuming it is ok to use a drill w/ one of those wire brush >attachments for this. (?) >2. Apply some kinda rust-killer/suppressor stuff and let sit... (see, i >don't know squat... help! :) >3. Mask section and apply a few coats of primer. >4. Let dry and pray. > Before you put the primer on put fiberglass resin over the rust. The resin will seal it better than any primer. After it dries you will need to sand it down flush. Larry Larry Edson '66 Type 34 Karmann Ghia sonofed@ix.netcom.com '65 Type 345 w/ electric sunroof http://freeyellow.com/members/type34/ '63 343 (project)