[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
Well the spot i am talking about really is the wheel well because the fenders and all of that has already been done. So, I need to figure out how in the world i can possible contor the walls of the wheel wells. What do you all think. has anyone ever tried this on a type 3? From,(swaffordvw@juno.com) VW LIVES IN MY BLOOD! 1971 Squareback VeeWee w/A/C (No compressor) 1983 Rabbit GTI 8Valve (151K and muffler knocking on the floor) ------------------------Delhi Ohio------------------------- Call OffRoad Center 513-353-3733 For VW Stuff! Tellem Chris Swafford Sent Ya! ===============-------------->>>>>>>><<<<<<<------------=============== On Wed, 09 Jul 97 07:06:00 PDT Jason Renville <Jason_Renville@ccm.al.intel.com> writes: >To remove the rear quarter panel(fender) you have to remove the rear >upholstery >panels. There are 10 or so 10mm blots holding the fender on. If you >have it >primed make sure you have it sealed also. This is the biggest mistake >people >make. If you just have it primed it can still rust through the >primer. Primer >is very pourous and adsorbs and traps water very well. > >J- > >Hmm i never herd of them coming apart by screws or something neither >did >i look. I do know it needs them before its ever driven in rain. but i >was >curious. DO you have to cut anything on it. >In the rear its rusted in the front (front meaning facing front of the >car) of the wheel well and its not really thru to the inside there yet >but in the front infront of the heater channel its rusted there i >guess >because of the antenna and the otherones are pretty minor but the car >otherwise is stockly solid and needs to be repainted to the very rear >isnt in primer no more but i am looking seriously into having this >done >sooner than i think if you know what I mean. > >Thanx for replying. Maybe i will send you some xeroxed pictures. Im >sure >i can get it to come out good. Its a Light cream white color. > VW LIVES IN MY BLOOD!!! >From,(swaffordvw@juno.com) >71 Squareback Need Quarterpanel work otherwise perfect Cond. >83 GTI Rabbit 150K and still kickin. >===========DELHI, OHIO==================================== >Do You Do Quarterpanels EXPERTLY??? Email Me if You Do. > >On Tue, 08 Jul 97 07:12:00 PDT Jason Renville ><Jason_Renville@ccm.al.intel.com> writes: >>I don't do quarterpanels expertly but I have some in good shape. >>About >>ten bolts and the come right off. No messy welding like other cars. >>The ones I have are from a 1971 fastback. These are the same as a >>square. >> >> Jason Renville >>~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ >>I would rather attempt something great and >>Fail than attempt nothing and succeed. >> >>Jason_Renville@ccm.al.intel.com >>Portland, OR USA >>69 Fastback second owner. >> >>Now Mandatory Disclaimer >>Views expressed in this posting are my own and not those of Intel >>Corp. >>~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ >> >> >> >> >> >>______________________________ Forward Header >>__________________________________ >>Subject: Re: Cruising speed on 1500/1600 >>Author: type-3-errors@umich.edu at SMTPGATE >>Date: 7/7/97 10:31 AM >> >> >>In my squareback i usually dont go over 55mph or if everyone is doing >>70 >>i might push it to 60mph but i think that is why i never had to >>rebuild >>an engine yet hehehe >> >> >>From,(swaffordvw@juno.com)/m/20 >>71 Squareback Need Quarterpanel work otherwise perfect Cond. >>83 GTI Rabbit 150K and still kickin. >>=============DELHI, OHIO=========================== >>Do You Do Quarterpanels EXPERTLY??? Email Me if You Do. >> >>On Mon, 7 Jul 1997 13:12:48 -0500 "Jonathan Hirschman" >><jonathan@pathfinder.com> writes: >>>My Notch 1500 'S' cruises very comfortably at up to 130 kph, or >about >>>80 mph, although I usually putter along at a more sedate 100-110 >kph. >>>I've had her up past 140 kph before I started to get nervous. >>> >>>Jonathan >>>*Jonathan Hirschman* >>>*****Pathfinder***** >>>*Executive Producer* >>>*Time Inc New Media* >>>*Voice:212-522-4742* >>> >> >