[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
>From: parkkj@orion.crd.ge.com (Keith Park)
>Problem: I replaced the horse hair witha foam pad and am trying to put the
>cover on as the original, over the little spikes, and I just cant get the
lower section (with a string in it, untied) to go all the way around the
lower seat
>rail. The diameter of the fully stretched cover, on the bottom, is MUCH less
>than the lower seat rail.
> I know there supposed to be a real stretch, I did the fronts sucessfully,
>but has anyone had similar problems??
I recall being close to tears trying to get my fronts to fit, but they
finally went together.
The first rear I did I found I had been sent the wrong cover. When I
measured and compared with my old one there was about an 8" linear
difference. A phone call straightened that out. Mine did not come from B&S.
Jim
---------------------------------------------------------------------
Melissa Kepner Jim Adney
jadney@vwtype3.org jadney@vwtype3.org
Laura Kepner-Adney
Madison, Wisconsin
---------------------------------------------------------------------