[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
>>I am attempting to install rear lap belts in a '66 Square, and I can't
>>find the outer mounting location. There is a mount for shoulder in the
>>window pillar, and two mounts under the seat at the center (about 6
>>inches apart). The only bolts/holes I can find to the outside under the
>>seat are tucked under a steel sheet, and I think are supposed to hold
>>the torsion beam onto the pan? Anyway, the hole through this steel
>>sheet is too small to fit the belts metal end onto the bolt anyway.
>>Anyone able to point me in the right direction?
>>Peter Parker
The lower outside point was provided by a reinforcement plate that was spot
welded to the underside of the fenderwell. Get them from a later car at the
junk yard.
Jim
---------------------------------------------------------------------
Melissa Kepner Jim Adney
jadney@vwtype3.org jadney@vwtype3.org
Laura Kepner-Adney
Madison, Wisconsin
---------------------------------------------------------------------