[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
At 10:02 PM 4/15/97 -0700, you wrote: >I am attempting to install rear lap belts in a '66 Square, and I can't >find the outer mounting location. There is a mount for shoulder in the >window pillar, and two mounts under the seat at the center (about 6 >inches apart). The only bolts/holes I can find to the outside under the >seat are tucked under a steel sheet, and I think are supposed to hold >the torsion beam onto the pan? Anyway, the hole through this steel >sheet is too small to fit the belts metal end onto the bolt anyway. >Anyone able to point me in the right direction? >Peter Parker >Portland, Oregon Could be there is no third mounting point. My '65 Beetle also only has the shoulder mount and the mount on the tunnel. My '71 Beetle has a third mount low in the door pillar but was fitted with shoulder belts only. Hanno Spoelstra <H.L.Spoelstra@WbMt.TUDelft.NL> Bloemendaal, The Netherlands