Re: [T3] Parting out front axle and rear subframe!

[Cybernotchback <cybernotchback@yahoo.com>]

________________________________
From: Jim Adney <jadney@vwtype3.org>
To: type3@vwtype3.org
Sent: Wednesday, September 7, 2011 3:30 PM
Subject: [T3] Parting out front axle and rear subframe!

I'm in the process of parting out a front axle beam and a rear 
subframe. Both are from a '72 squareback.


The rear subframe is still intact, but I'm having trouble getting the 
torsion bars out. I lifted the spring plate just enough to get it off 
the stop, but I don't seem to be able to apply enough force to pull 
the spring plate off the torsion bar. It seems like it's really stuck 
on there. 
Anyone got any hints about how to make this easier?

You didn't specifically mention this but have you lowered the spring plate past the stop and relieved all of the tension off the bar(s)?Ê If not that will prevent you from pulling the spring plate off the bar.Ê Just too much force on the joint(s) to allow the bar to slip out of either end easily.Ê 

Just a thought.

John
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.vwtype3.org/private.cgi/type3-vwtype3.org/attachments/20110907/9d771d8d/attachment.htm>
_______________________________________________
VWType3.Org mailing list - type3@vwtype3.org
http://lists.vwtype3.org/listinfo.cgi/type3-vwtype3.org
Contact gregm@vwtype3.org if you need help with the list.