Re: [T3] Rear brake hoses, IRS

[Jim Adney <jadney@vwtype3.org>]

On 18 Mar 2006 at 22:04, Constantino Tobio wrote:

> Is it possible that my 73 AT doesn't use the 211 611 775C brake hoses on
> both sides? Those hoses are M-F, and it appears (I haven't removed them
> yet) that my R/H hose is F-F. The LH hose goes right into the brake tee,
> and the line that goes to the right goes into this tee and seems to end
> in a male fitting.

Both front hoses should be M-F.

Tee? What's on the other branch? There should not be a Tee there.

To each wheel there should be a M-M hard line from the MC to an 
"anchor" point on the frame horn. The hose has a F end which attaches 
with a clip in that anchor and then has a M end into the caliper.

Both sides are basically the same, except for the fact that the hard 
lines are different lengths.

Maybe you just haven't gotten a good look at it yet....

-- 
*******************************
Jim Adney, jadney@vwtype3.org
Madison, Wisconsin, USA
*******************************

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~