[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On 18 Mar 2006 at 22:04, Constantino Tobio wrote: > Is it possible that my 73 AT doesn't use the 211 611 775C brake hoses on > both sides? Those hoses are M-F, and it appears (I haven't removed them > yet) that my R/H hose is F-F. The LH hose goes right into the brake tee, > and the line that goes to the right goes into this tee and seems to end > in a male fitting. Both front hoses should be M-F. Tee? What's on the other branch? There should not be a Tee there. To each wheel there should be a M-M hard line from the MC to an "anchor" point on the frame horn. The hose has a F end which attaches with a clip in that anchor and then has a M end into the caliper. Both sides are basically the same, except for the fact that the hard lines are different lengths. Maybe you just haven't gotten a good look at it yet.... -- ******************************* Jim Adney, jadney@vwtype3.org Madison, Wisconsin, USA ******************************* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~