Re: [T3] fastback 1/4 removal how do you

[BOB2TYPE3S@aol.com]

In a message dated 6/22/06 6:36:20 PM Eastern Daylight Time, 
jadney@vwtype3.org writes:

<< Go inside the car and pull back the rubber window seal, top and bottom, 
about 4-
 6" back from the front end of the window. You will find small nuts, both top 
 and bottom, which you can remove. Then the window will come out. >>

There are 4 nuts per window. Two on top, and 2 on bottom. You might have to 
remove the big black clip to get the seal to flex, but it might not be 
neccessary. Remove the 2 screws holding the pop out hinge too.

Bob 65 Notch S w/ Sunroof and IRS (Krusty)
       71 Square, now a 2 seat Roadster, pics can be seen at; 
http://volksrods.com/forums/index.php?showtopic=2977 and now has a dead T-3  with D-jet FI 
engine. : (
       

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~