[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
On Sun, 2006-06-11 at 14:35, knowonelse@sbcglobal.net wrote: > I've been chasing various electrical pathways > and found an unconnected wire. It goes to the > Turn Signal Emergency Flasher connector 15 > according to Bentley based on where it comes from > on the fuse box. > > There is a piece of paper in the area of the many > male connector ends on the flasher, but I have > three that are unpopulated so don't know which > is the right one. > > The paper is worn and there is no writing left > on it, and I don't see any embossed writing on > the flasher unit. I can't see how to remove the > unit itself other than to remove the bracket it > is attached to. > > Does anyone have a photo or layout of a the > flasher connections so I can tell where to plug > in the loose wire? and to see what doesn't have > any wiring, but might need it? > Grab the wiring diagrams for your car off either the Samba Technical, or off my web site. The wire colors and terminal designations are shown on the wiring diagrams. If it is terminal 15, tha is hot with the key on. -- Russ Wolfe '71 FB AT '66 FB MT '64 T34 (not running) '65 T1 (not running) '05 KIA Sorento SUV russw@classicvw.org http://www.classicvw.org ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~