RE: [T3] Installing turn signal switch (arm)?

["Toby Erkson" <icbm@icbm.org>]

Russ,
I saw the piece you mentioned.  It's a grey collar, somewhat C-shaped, that
goes around the input/output of the windshield washer valve.  It took some
prying with a small screwdriver -- in the process got kinda marked up -- but
I got it removed.  Then guess what?  The whole switch assembly slipped right
out like a greased pig!  And guess what else?  That SOB ain't going back in
when I install the replacement switch!!!

I'll take pictures of the item and post to my web site albums later.  Thanks
a lot! 

     Toby Erkson  --  air_cooled_nut@pobox.com
     '72 VW Squareback, '95 VW Jetta, '81 Gold Wing,
     '73 Porsche 914, '90 Wet Jet
     http://www.icbm.org/
     Portland, Oregon


>-----Original Message-----
>Just zoomed the illustration, and don't see it shown. It is 
>similar to item 48 and 49, which are on the wire part.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~