[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
The TMI cover I got was not made properly, and therefore wouldn't fit properly no how. Check and make sure that the seam for the bows is in the same place relative to your old headliner. Mine had a seam right over the dome light and therefore that bow never fit properly... and if ANYTHING doesn't fit properly it will screw up the rest of it. Keith Top Notch Restorations topnotch@nycap.rr.com 71 Squareback 65 Notchback "El Baja Rojo" 65 Squareback "Eggcrate" 87 golf "Winterat" 93 RX7 "Redstur" -----Original Message----- From: Dave Sanderson [mailto:porschedave@rennlist.net] Sent: Saturday, January 14, 2006 11:16 PM To: type3 Subject: [T3] Notch headliner installation question Greetings I tried to put my new TMI Notch headliner in place today - and that was tough. In fact, it's not yet done. Are they folks out there who have done this successfully that I can speak with? The main issue is how to get it smooth over the whole surface. Thanks. Dave David Sanderson, PCA-CWR Past President, Secretary, Editor... just past (604) 822 - 4361 or (604) 255 - 4935 voice (604) 822 - 6842 fax porschedave@rennlist.net 1977 911S 3.0 L 1965 Sunroof Notch 1966 Notch http://members.rennlist.com/porschedave/ http://www3.telus.net/SUDAMA ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~