[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [New Search]
Your clutch pedal hook has come off the cable, due to the pedal laying over the wrong way. You will have to get that back on. My sb had the same problem with the stop ripping out. I have a 6"x6" stainless steel plate underneath that section of car with a piece of small stainless steel block on top of the plate that works as my stop. The plate is just bolted underneath the car. It is a simple fix as long as you don't mind having the plate bolted to the bottom of the car. > _____________________________________________ > From: type3-d-request@vwtype3.org > [mailto:type3-d-request@vwtype3.org] > Sent: Thursday, January 12, 2006 7:49 PM > To: type3-d@vwtype3.org > Subject: type3-d Digest V2006 #13 > > << Message: Untitled Attachment >> << Message: Re: [T3] Injector > problem? >> << Message: Re: [T3] T3Konny >> << Message: [T3] 68 > notch on the samba >> << Message: [T3] frt beam clamps >> << > Message: Re: [T3] 68 notch on the samba >> << Message: Re: [T3] frt > beam clamps >> << Message: Re: [T3] Injector problem? >> << Message: > [T3] Clutch Troubles >> << Message: Re: [T3] frt beam clamps >> << > Message: Re: [T3] 68 notch on the samba >> << Message: Re: [T3] > Clutch Troubles >> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ List info at http://www.vwtype3.org/list | mailto:gregm@vwtype3.org ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~